iDVR

Designed for households and offices
Latest relay technology, free of regular maintenance

Emmerich Stabilizer - Type iDVR with Relay technology combined with an auto transformer, produces a stabilizer that is free from regular maintenance, intended for household and office users. We designed the iDVR stabilizer with the latest Relay technology which can produce incredibly fast response speeds, stabilizing the voltage with a response speed of 180 ms to input voltage fluctuations. Emmerich iDVR stabilizers are available in capacities of 2 - 3 - 5 - 8 - 10 kVA single phase input and output models.

Digital Microprocessor Controller

The digital microprocessor controller system always monitors the input voltage continuously. If the voltage fluctuates, the controller will give a command to the relay combination system device to adjust the constant output voltage to the 220 V level with an accuracy level of 5%.

Colorful Digital Display

When you turn on the iDVR, the large Colorful Digital Display screen displays all stabilizer status and information precisely and more attractively. Input-output voltage is displayed in real time and simultaneously. Under-over voltage, over temperature, startup delay, system failure and overload indicators are designed to be integrated in one display. The amount of stabilizer load usage is informed by a bar graph displayed on the display in real time. This Colorful Digital Display certainly makes it easy for you to monitor the status and use of the stabilizer load at any time.

Easy bypass

The bypass system is designed to be integrated in the stabilizer unit, now bypassing is easy, safe and practical. We reimagined the bypass system by using Easy Bypass, this system makes it much easier and safer for you to bypass when a problem occurs with the unit. You just need to select bypass or stabilizer mode.

You can save costs, no longer need additional costs to install bypass panels on your walls. And of course your walls will be more beautiful and clean without bypass panels.

Maximum Protection

Emmerich stabilizers are designed not only to stabilize voltage, but also to provide full protection to equipment. iDVR is equipped with an under-over voltage protection feature, which will provide cut-off protection if the electrical voltage is too high or too low at the input voltage, thus providing protection for the equipment we use. The temperature trip protection feature is also embedded in the iDVR. If the stabilizer is overloaded, resulting in excess heat, the heat sensor will work and give a command to the controller board to disconnect the stabilizer output from the electricity supply.

Technical Specification

Product Design, specification, dimension and colour can be changed anytime without advance notice. Please contact your nearest dealer/store for more information and details